- Bachelor of Engineering with Honours in:
- Aeronautical Engineering
- Aerospace Systems
- Mechanical Design Engineering
- Bachelor of Science with Honours in Computing Science
Assessment is governed by the University’s Code of Assessment, which is part of the University Calendar (the formal regulations). A full explanation is provided here. This specifies a set of grades from A1 (highest) to H (lowest) with descriptions of each grade shown in the table below. Some courses, notably projects, are assessed using these grades directly but most examinations in Engineering are marked in percentages. The School converts these to grades using the mapping in the table as a guide but this may be varied.
Mapping of percentage marks to grades and verbal descriptors of grades from Code of Assessment
|Gloss||Primary verbal descriptors for attainment of Intended Learning Outcomes|
|A 1||22||84-100||91-100||Excellent||Exemplary range and depth of attainment of intended learning outcomes, secured by discriminating command of a comprehensive range of relevant materials and analyses, and by deployment of considered judgement relating to key issues, concepts and procedures|
|B 1||17||67-69||67-69||Very Good||Conclusive attainment of virtually all intended learning outcomes, clearly grounded on a close familiarity with a wide range of supporting evidence, constructively utilised to reveal appreciable depth of understanding|
|C 1||14||57-59||57-59||Good||Clear attainment of most of the intended learning outcomes, some more securely grasped than others, resting on a circumscribed range of evidence and displaying a variable depth of understanding|
|D 1||11||47-49||47-49||Satisfactory||Acceptable attainment of intended learning outcomes, displaying a qualified familiarity with a minimally sufficient range of relevant materials, and a grasp of the analytical issues and concepts which is generally reasonable, albeit insecure|
|E 1||8||37-39||37-39||Weak||Attainment deficient in respect of specific intended learning outcomes, with mixed evidence as to the depth of knowledge and weak deployment of arguments or deficient manipulations|
|F 1||5||27-29||27-29||Poor||Attainment of intended learning outcomes appreciably deficient in critical respects, lacking secure basis in relevant factual and analytical dimensions|
|G 1||2||15-19||15-19||Very Poor||Attainment of intended learning outcomes markedly deficient in respect of nearly all intended learning outcomes, with irrelevant use of materials and incomplete and flawed explanation|
|H 0||0||0-9||0-9||No convincing evidence of attainment of intended learning outcomes, such treatment of the subject as is in evidence being directionless and fragmentary|
*BEng refers to Bachelor of Engineering programmes
**BSc refers to Bachelor of Science programme
In order to be awarded the credits and to gain one of the grades in the table, the student must have completed a course satisfactorily. If the student has not been awarded the credits for a variety of reasons other results are used.
- MV means that the student had medical or personal circumstances which prevented them from taking the exam at first sitting and students can take the resit without penalty.
- CW means that the student has not completed some part of the assessment (exam, laboratory report etc) but can still do so before the next academic year. Contact the lecturer if in doubt as to what needs to be done.
- CR means that the student has not completed some compulsory element of the course (attended laboratories etc) and it is not possible to remedy this in the current academic year. Students cannot change CR by taking a resit exam and would need to repeat the course and the progress committee may not permit this. Contact the lecturer if in doubt as to why the student was refused credit for a course.
- 07 means a deferred result – The University was not able to give the student a grade at the usual time. The reasons range from study abroad to plagiarism so please ask if this is unexpected.
- ZZ means that the student is a debtor. The student cannot see their results until the debt has been cleared.
Each grade also has an aggregation score on a scale from 0–22. These are used to calculate the student's average performance, which is needed to check the student's progress and for graduation. (There was formerly a 0–16 scale as well but it is no longer used.)
Please note that there is no resit available for Year 2 (Level 4) courses, such as Control 4N or Software Engineering 3N for BEng in Mechanical Design Engineering.
The student's results at the end of each academic year must meet certain requirements for the student to progress through the degree programme. There are similar requirements for graduation. These are set out formally in the University Calendar. The following is a brief, unofficial summary.
Progression (BEng Programmes)
For progression from Year 1 (Level 3) to Year 2 (Level 4) in BEng, the student's Year 1 results excluding the courses undertaken in Glasgow during OIP must satisfy these conditions:
- successful completion of 120 credits with a minimum grade of E3 in every course (130 credits for Aerospace programmes)
- minimum grade of D3 in the best 110 credits
- GPA of at least 9.0 (i.e., D3) on the 0–22 scale
The student may resit courses in Year 1 to meet the progression rules. The grade points are capped at 9, corresponding to D3, and only the student's results from the first attempt in Year 1 will be carried forward to the student's degree classification.
The School Progress Committee meets in June and September to consider the progress of all students. They consider the student's results with any evidence of personal difficulties and decide whether the student:
- can make normal progress to the next year of study
- are offered the opportunity to repeat some courses in order to improve the student's results; there is no automatic right to any further reassessment beyond the first resit
- should be excluded from further study, in which case the committee will consider whether the student's results meet the standard for an exit award
Note that Applicable Mathematics 2N, 2S and 3S are included in the progression requirements but not in the degree classification. The courses undertaken in Glasgow during the OIP are included in the calculation of the Year 1 GPA used for the student's degree classificaton.
Progression (BSc Programme)
For progression from Year 1 (Level 3) to Year 2 (Level 4) in the BSc, the student's Year 1 results must satisfy these conditions:
- successful completion of 120 credits
- an aggregate score of D3, (i.e. 9 on the University 22 point scale) in Year 1 (Level 3), at the first attempt
The student may resit courses in Year 1 to meet the progression rules or prerequisites for Year 2 (level 4) courses.
The purpose of progress regulations is to stop the student from wasting time (and money) by studying for a degree that the student is unlikely to achieve.
|Honours GPA||Honours classification|
|18.0 – 22.0||First class|
|17.1 – 17.9||Either first or upper second class (discretion)|
|15.0 – 17.0||Upper second class|
|14.1 – 14.9||Either upper second or lower second class (discretion)|
|12.0 – 14.0||Lower second class|
|11.1 – 11.9||Either lower second or third class (discretion)|
|9.0 – 11.0||Third class|
|8.1 – 8.9||Either third class or fail (discretion)|
|0.0 – 8.0||Fail|
The University has general requirements for graduation and BEng has extra rules that are similar to those for progression. To successfully complete Year 2 (Level 4) in BEng, the student must satisfy these conditions at the first assessment:
- successful completion of 120 credits with a minimum grade of E3 in every course
- minimum grade of D3 in the best 100 credits
- average GPA of at least 9.0 (i.e., D3) on the 0–22 scale
- grade D3 or better in Individual Project work
These rules are set by the Engineering Council for accredited degrees. The student will be considered for the degree of BSc (Honours) in Engineering, which is not accredited, if the student meets the university’s standard requirements but not the extra rules. Note that the student requires a minimum grade of D3 in the student's major individual project for any honours degree and that reassessment is not permitted in year 2 (level 4).
The student's degree classification is calculated from a weighted average of results from Year 1 (Level 3) and Year 2 (Level 4) weighted 30/70.
The University has general requirements for graduation and the BSc has extra rules that are similar to those for progression. Year 2 (Level 4) has nine courses, and an individual project that counts for three courses. To successfully complete Year 2 (Level 4) in the BSc, the student must satisfy these conditions at the first assessment:
- An average grade of at least 9.0 (i.e. D3) on the 0-22 scale
- successful completion of 120 credits
- A grade of at least D3 on the level 4 individual project
The student's degree classification is calculated from a weighted average of results from Year 1 (Level 3) and Year 2 (Level 4) weighted 40/60.